Notice BSD blind spot detection * BSD Alarm ●this function is only helpful for safety drive, but not belong to the vehicle driving safety system. It only plays an auxiliary role and cannot instead the driver's control. ●when the camera is covered by rain, snow, mud, ice and snow, the function will show false alarm or missing alarm, please drive carefully. the night, rain, snow, fog, shadow, etc., this function may produce false alarm and missing alarm, please drive carefully. BSD is to use the side camera to detect the blind spot of the rear view mirror and remind the driver to avoid accidents caused by this blind spot during lane changing.
When a moving vehicle is detected in the blind spot set by system, the monitoring indicator of corresponding rear view mirror will be on. In this case, when the corresponding side turning signal is on , the indicator will flash, and the system will give an alarm to remind the driver that there is a vehicle in the blind area of the rear view mirror. Auxiliary interface: When the system detects the moving object, the combination instrument displays the BSD and alarm interface. And make external rear view mirror BSD alarm light on and sound alarm. 171