engine started Driving in running-in period Engine Run-in before moving In order to improve the service life of the vehicle, the new car in the use of the initial should be run in, can be used normally.The following provisions for the run-in period: ●the mileage of run-in is 1500km. ●choose a better road and drive light load. not exceed 80% of the maximum speed. not press the accelerator pedal to the bottom for rapid acceleration. ●avoid emergency braking for the first 500km.
●strictly follow the operating procedures to maintain the normal engine temperature .Do the daily maintenance work carefully, check frequently, pay attention to the sound and temperature change of each assembly in operation. After the engine runs in following the requirements, it can not only prolong the service life, but also reduce the fuel consumption. The new engine must be run in for 1500km, and the following regulations must be observed during the run in: ●avoid high engine speed , do not exceed the maximum speed of 80%. ●do not use as a tractor trailer. At 1000-1500km, the engine speed and vehicle speed can be gradually increased to the maximum allowable range.
In the early run-in, the engine's internal friction resistance larger , oil consumption may be higher than normal, should regularly check the engine oil. All the moving parts of the engine can reach the best performance after running in. oil leakage After the vehicle has stopped for a moment, check the underside for any oil, oil, water or other liquid leakage. Water dripping after air conditioning is normal. driving Instrument cluster: Ensure that the red and yellow alarm lights on the cluster are not on. Brakes:
Under the condition of ensuring safety, drive at a low speed, step on the brake pedal, check whether the brake is reliable, the vehicle will not deviate, the brake does not sound abnormal. Noise: Check the vehicle for unusual noise. 177