3.Rotate the jack screw so that jack head notch blocks the body supporting point, but do not jack up the vehicle. 4.Place the spare wheel below the wheel on side of the wheel with fault, in order to play a role in safety precautions. 5. Remove the wheel nut cover with a wheel nut cover removal tool. 6. Counterclockwise unscrew the fault wheel fixed nut with wheel nut wrench 7. Rotate clockwise the jack and lift up until the wheel with fault leaves the ground. 8. Remove the wheel mounting bolts, remove the wheel with fault, and place the wheel with fault in the appropriate position below the vehicle with the outer surface upward, and replace the spare wheel.
Caution ●You must fully loosen the bolts of the wheel with fault before jacking up the vehicle. not remove the wheel mounting bolts before the wheel leaves the ground. Note ●When the vehicle is traveling, the heat generated by the brake system can cause wheel mounting bolts hot, so you should be careful not to be injured when dismantling the wheels. 227