20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS In this range, preheating with a starting aid is necessary. 3-11 RESERVOIR KIND OF FLUID AMBIENT TEMPERATURE –40 –22 –4 14 32 50 68 86°F –40 –30 –20 –10 0 10 20 30°C CAPACITY Specified amount Refill capacity Engine oil pan Engine oil 58 ¬ 15.31 US gal 51 ¬ 13.46 US gal SAE 15W -40 S AE 1 0W- 30 SA E 30 S AE 1 0WC D Power train oil pan (incl.
transmission, torque converter and bevel gear case) Damper case 250 ¬ 66 US gal 2.1 ¬ 0.55 US gal 150 ¬ 39.6 US gal 2.1¬ 0.55 US gal SA E 30 SAE 10W Final drive case (each) Pivot shaft case (each) 65 ¬ 17.16 US gal 18 ¬ 4.76 US gal 65 ¬ 17.16 US gal — SAE 30 Hydraulic system 270 ¬ 71.33 US gal 120 ¬ 31.70 US gal SAE 10W M IL-H -560 6C Carrier roller (each) Track roller (each) Idler (each) Bogie cartridge pin (each) Gear oil 0.70 – 0.80 ¬ 0.18–0.21 US gal 1.40 – 1.50 ¬ 0.37–0.40 US gal 1.45 – 1.70 ¬ 0.38–0.45 US gal 0.23 – 0.25 ¬ 0.06–0.07 US gal 0.70 – 0.80 ¬ 0.18–0.21 US gal 1.40 – 1.50 ¬ 0.37–0.40 US gal 1.45 – 1.70 ¬ 0.38–0.45 US gal 0.23 – 0.25 ¬ 0.06–0.07 US gal G O 1 40 Fuel tank Diesel fuel 1050 ¬ 277.41 US gal — A STM D97 5 N o.2 AST M D 975 No.1 Grease fitting Grease — — NLG L (M IL-G -187 09A) NLG L (MIL -G-10 924C) Cooling system Water Add antifreeze Water 165 ¬ 43.59 US gal —