. OPERATION DETAILED CONTROLS AND GAUGES Example 10:05 J 10:00 10:59 J 11:00 10:26 J 10:26 Use the H, M, and ADJ buttons to set to the correct time. 3 - 58 Setting Correct Time tton (4) to display the time. 1. Press display selector bu After 5 seconds, the displ and the time cannot be display selector button (4 2. Press time adjustment bu H button: Adjusts the hou time advances by one ho M button: Adjusts the min the time advances by on If the H or M button is continuously until the but ADJ button: When the AD as follows. When display is 00 - 05 00 sec. (No change in h When display is 55 - 59 00 sec. (Hour advances When display is 06 - 54 stays same) 1.
Press display selector bu ay will return to the frequency display corrected. If this happens, press ) again. tton (8) to set to Hour or Minute. r (each time the button is pressed, the ur) ute (each time the button is pressed, e minute) kept pressed, the time will advance ton is released. J button is pressed, the time is reset minutes, time is returned to 00 min. our) minutes, time is advanced to 00 min. ) minutes, time cannot be reset. (Time Antenna NOTICE Before transporting the machine or putting it inside a building, stored the antenna to prevent any interfere nce.
Use Radio with Care To ensure safety, always k eep the sound to a level where it is possible to hear outside sou If water gets into the spea ker case or radio, it may lead to an unexpected failure, so be c on the equipment. Do not wipe the scales or buttons with benzene, thinner, or any other solvent. Wipe with a cloth soaked in alcohol if t he equipment is extremely dirty. When the battery is replac ed, the settings for the preset button s are all cleared, so set th