. OPERATION MACHINE OPERATIONS AND CONTROLS STARTING ENGINE Normal Starting WARNING again. 1. Check the lock lever (1) is at the LOCK position. If the lock to the 3 - 79 Sit down in the operator's seat before sta Do not atte mpt to start th e engine by sho rt-circuiting the eng ine starting circuit. Such an act may cause serious bodily injury or fire. Check that there are no p ersons or obsta cles in the surroun ding area, then sound the horn and st Exhaust ga s is toxic. Wh en starting the e ngine in confined s paces, be particularly careful to ensu NOTICE Before star ting the engine, check that the fuel control dial is at the low idle (MIN) p If the fuel c osition.
ontrol dial is at the FULL position, the engine will accelerate suddenly a Do not cran nd cause damage to the engin k the starting motor continuou e parts. sly for more than 20 seconds. n the FREE position, the e ngine does not st 2. Set fuel control dial ( 2) at the low id le (MIN) position. If it is at low idle the high idle (MAX) position, always chang n. (MIN) positio