. OPERATION TROUBLES AND ACTIONS Starting the Engine WARNING 3 - 138 Alway s check t hat the lock l ever is set to the LOCK position, regardless of whether the mach ine is working no rmally or ha s failed. Check als o tha t all the cont rol levers are in the neu 1. Make sur e the clips are firmly connected to the battery terminals 2. Start engine of the n ormal machine and r un it at high i dle s peed. 3. Turn the starting swi tch of the problem m achine to the START position and s tart the engine. If the engine doesn't start at first, try agai n after 2 minutes or so. Booster Cable Disconne After the engine has st reverse o rder in which th ey were connected. 1.
Remove one clip of booster cable (B) from the revolvin g frame of the problem mach 2. Remove t he other cli p of booster cable (B) from the negative (-) terminal o f the norm al machine. booster cable (A) f al machine. 3. Remove one clip of terminal o f the norm 4. Remove t he other cli p of booster cable (A) from the positive (+) terminal o f the probl