. MAINTENANCE MAINTENANCE PROCEDURE CHECK OIL LEVEL IN SWING MACHINERY CASE, ADD OIL WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil 1. Remove dipstick (G) and wipe the oil from the dipstick with a cloth. removed, install cover (C). 4 - 50 temperature to go down bef ore performing this 2. Fu lly insert dipstick ( 3. Re move dipstick (G) and check the marks on the gauge. The level is correct if t he top of the oil on the dipstic k is between e H and L marks. 4. If t he oil level is belo w the L mark, remove t he cap from oil filler rt (F) and add eng 5.
If t he oil level is abov e the H mark, remove cover (C) unde r the assis. Then loose rt and drain the ex 6. Af ter adding oil and d tighten the cap