. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT tank. Attachment Installation 6 - 19 7. Pull out the mounting pins (2 p laces), remove the attachment, then install t he bucket. For details "BUCKET 3-111)". of the procedure REPLACEMENT After installin 1. Remove the For bucket d ismounting proce dure, see "BUCKE T REPLACEMENT AND INVERSIO 2. Place the att achment in a horiz ontal position, then install to the arm with pin (A) and then pin ( 3. After confirm ing low oil temper ature, remove the p lug from the outlet and in let port respective Take care mousepiece If O-ring is d amaged, replace i 4.
Connect the hose at the attac hment side When doing this, check the di careful not to make any mistak 5. Turn the roto r of the stop valve s installed to the inl et and outlet piping at the side of the arm to the FREE position 6. After installi hydraulic tan