. OPERATION DETAILED CONTROLS AND GAUGES OPERATION DETAILED CONTROLS AND GAUGES REMARK When the auto-deceleration switch is pressed and the auto-deceleration is actuated, the mode is displayed in the center Travel Speed Selector Switch WARNING Each time that the switch is pressed, the display changes Lo J Mi J Hi J Lo in turn. 3 - 20 of the monito r display, and the screen retu rns to the nor after 2 seco When loadi ng or unloading fro m a trailer, al ways travel at l ow speed (wit h travel speed selector switch (3) at the Lo position). Never oper ate travel speed sele ctor switch ( 3) while loadin g or unloading .
If the trave l speed is switched between Hi a nd Lo when the machine is t raveling , the machine may deviat e to one side, even when trave Stop the m ling in a straight line . ing the travel speed. achine before switch ing the trave l speed. Switch (3) is used to set the tr avel speed Lo lights up Mi lights up : Hi lights up : : Low-speed trave Medium-speed tr Hi-speed travel When trave speed (Lo) to match the travel s urface on s oft ground or when traveli ng uph ill where travel power is needed, so there is no need to operate the switc h. The moni tor display la mp remains li ghted up at Hi (high speed tra vel) or Mi (middle speed travel