. OPERATION DETAILED CONTROLS AND GAUGES Travel Levers WARNING Work Equipment Control Lever Left work equipment control lever (3) is used to operate the arm and upper structure. Arm operation (a) Arm OUT (b) Arm IN Swing operation (c) Swing to right (d) Swing to left 3 - 36 Do not rest your foot on the pedal during operations. I f the p edal is depressed by mistake, serious accident. Be travel or steering opera rest your foot on it. the machine may suddenly move and c ause a extremely careful when operating the pe dal for tions.
When you are not using the pedal, do not If the track frame is faci ng the rear, the direction of travel o peratio ns will be reversed when the t forward when operate forward; the left and ri ravel lever is operated. (The machine will travel d in reverse, and in reverse w hen operated .) erated ght directions will also be reversed When operating the tra vel levers, check if the track fram e is faci ng the front or the rear. (If the the front.) sprocket is at the rear, the track f rame is facing Lever (2) is used to cha nge the direction of travel between fo rward and reverse. ( ) shows the pedal operation.
ver is pushed forward edal is angled forward) er is pulled back edal is angled back) ne stops (a) FORWARD: The le (The p (b) REVERSE: The lev (The p N (Neutral): The machi REMARK h travel alarm (If equipped) Machines equipped wit h travel alarm (If equipped) If the lever is shifted to the forward or reverse position from t he neutral position, the alarm so unds to warn that the machine is starting to move. N (Neutral) : The uppe r structure and arm are held in positio n and do not mo ve.