OPERATING THE ENGINE BEFORE STARTING ENGINE 1. Confirm that pilot control shut-off lever (1) is in the LOCK 1 position. 2. Confirm that all control levers are placed in neutral. 3. Adjust the seat to allow full pedal and control levers stroke with operator’s back against the backrest. Fasten the seat belt. NOTE: Use a wet cloth when wiping dust off monitor or switch panels to prevent damaging the panel face. Rubber is used on the switch parts. Take care not to tear the rubber-made parts with sharp-edged tool, such as a screwdriver. LOCK Position M1U1-01-025 T1V1-05-01-117 CAUTION:If the security lock screen is displayed when turn the key switch to ON position, return key switch to OFF.
Wait for more than 30 seconds (the buzzer stopped), then try again. If the security lock screen is displayed again, contact your nearest HITACHI dealer. T1V5-05-01-005 Security Lock Screen 3-2