OPERATING THE ENGINE NOTE: When maintenance information display is ON with maintenance setting, the scheduled maintenance screen for the item whose change interval has expired displays for three to ten seconds. Then, the basic screen displays. 7. The basic screen will be displayed on the monitor. The machine will automatically check if preheating is required or not. When preheating is required, preheat indicator (4) is lit for automatically. NOTE: In case, preheat indicator (4) does not come ON, pre- heating is not required. T1V5-05-01-170 8. As soon as preheat indicator (4) goes OFF, turn the key switch (2) to the START position to rotate the starter. 4 IMPORTANT: Prevent starter damage.
Never operate starter motor for more than 10 seconds at a time. If engine fails to start, return key switch to OFF. Wait for more than 30 seconds, then try again. After a false start, do not turn key switch until engine stops or starter may be damaged. 9. Release the key switch (2) immediately after the engine has started. It will return to ON position. M1U1-03-001 Basic Screen 3-6