OPERATOR'S STATION PUMP 2 FLOW RATE ADJUSTMENT (Only Machines Equipped with Optional Parts) IMPORTANT: This operation is effective when attachments are used. 1. When the basic screen displays, push the menu key and display main menu. 2. Select attachment adjustment from main menu by using keys 1 . Push determination key. Then, the attachment adjustment screen displays. and 2 3. Push key 2 . Then, the attachment adjustment screen for currently installed attachments displays. Basic Screen Menu Key T1V1-05-01-123 Determination Key Key 2 Key 1 T1V5-05-01-019 4. Adjust flow rate of Pump 2 by using keys 1 and 2 .
When using breaker 1 or breaker 2, pushing key 1 will decrease flow rate of pump 2 and pushing key 2 will in- crease respectively. Back Key Key 2 Key 1 T1V5-05-01-111 When using the pulverizer or crusher, pushing key 1 will increase flow rate of boom raise, arm roll-out, swing or travel circuit. Pushing key 2 will increase flow rate of attachment side. NOTE: When pushing the back key, return to the previous screen. 5. Push key 6 , and the basic screen displays. Back Key Key 2 Key 1 Key 6 T1V5-05-01-024 1-25