Installation EMU26902 Installation The information presented in this section is intended as reference only. It is not possible to provide complete instructions for every possible boat and motor combination. Prop- er mounting depends in part on experience and the specific boat and motor combination. EWM01590 1 ZMU01873 Overpowering a boat could cause se- vere instability. Do not install an out- board motor with more horsepower than the maximum rating on the capac- ity plate of the boat. If the boat does not have a capacity plate, consult the boat manufacturer. 1.
Center line (keel line) EMU26931 Mounting height (boat bottom) The mounting height of your outboard motor affects its efficiency and reliability. If it is mounted too high, propeller ventilation may occur, which will reduce propulsion due to excessive propeller slip, and the water in- takes for the cooling system may not get ad- equate water supply, which can cause engine overheating. If the engine is mounted too low, water resistance (drag) will in- crease, thereby reducing engine efficiency and performance. Most commonly, outboard motor should be mounted so that the anti-cavitation plate is in alignment with the bottom of the boat.
The optimum mounting height of the outboard motor is affected by the boat/motor combina- tion and the desired use. Test runs at differ- ent heights can help determine the optimum mounting height. Consult your Yamaha deal- er or boat manufacturer for further informa- tion on determining the proper mounting height. Improper mounting of the outboard mo- tor could result in hazardous condi- tions such as poor handling, loss of control, or fire hazards. For permanent- ly mounted models, your dealer or oth- er person experienced in proper rigging should mount the motor. EMU33470 Mounting the outboard motor The outboard motor should be mounted so that the boat is well balanced.
Otherwise, the boat could be hard to steer. For single-en- gine boats, mount the outboard motor on the centerline (keel line) of the boat. 33 WARNING