Yamaha Motor Corporation, USA 115TR — Maintenance

Maintenance EMU34445 Maintenance chart 1 TIP: The maintenance cycle on these charts assume usage of 100 hours per year and regular flushing of the cooling water passages. Maintenance frequency should be adjusted when operating the engine under adverse conditions such as extended trolling. Refer to the sections in this chapter for explanations of each owner-specific action. Disassembly or repairs may be necessary depending on the outcome of maintenance checks. Expendable or consumable parts and lubricants will lose their effectiveness over time and through normal usage regardless of the warranty period.

When operating in salt water, muddy, other turbid (cloudy), acidic water, the engine should be flushed with clean water after each use. The “ ” symbol indicates the check-ups which you may carry out yourself. The “ ” symbol indicates work to be carried out by your Yamaha dealer.

58 Item Actions Initial Every 20 hours (3 months) 100 hours (1 year) 300 hours (3 years) 500 hours (5 years) Anode(s) (external) Inspection or replace- ment as necessary Anode(s) (cylinder head, thermostat cover) Inspection or replace- ment as necessary Anodes (exhaust cover, cooling water passage cover, Rectifier Regula- tor cover) Replacement Battery (electrolyte level, terminal) Inspection Battery (electrolyte level, terminal) Fill, charging or replac- ing as necessary Cooling water leakage Inspection or replace- ment as necessary Cowling clamp Inspection Engine starting condi- tion/Noise Inspection Engine idling speed/ Noise Inspection Fuel filter (can be dis- assembled) Inspection or replace- ment as necessary Fuel line(High pres- sure) Inspection