MICHIGAll CONSTRUCTION MACHINERY DIVISION CUIRK EQUIPMENT TORQUE CONVERTER ASSEMBLY (Continued) Item No. Part No. No. Description Req'd. Item No. Part No. No. Description Req'd.
68 450245 * PUMP, Converter Charging 1 100 222008 LOCKPLATE, Turbine to Hub 4 69 551906 GASKET, Charging Pump 1 101 222263 TURBINE 1 70 203253 STUD, Charging Pump Mounting 3 102 218753 HUB, Turbine 1 71 221992 SLEEVE, Charging Pump 1 103 223866 RING, Hub Retaining 1 72 1C-820 BOLT, Pump Adapter 4 104 218778 "0" RING, Impeller to Cover 1 73 4E-08 LKWSHR, Pump Adapter 4 105 218870 COVER, Impeller 1 74 227034 ADAPTER, Pump 1 106 75 25K-40416 "0" RING, Adapter 1 107 218855 RETAINER, Bearing 1 76 224039 RING, Inner Washer Retaining 3 108 211323 RING, Piston 1 60K-40608 "0" RING, Impeller Cover Cap 1 77 100838 WASHER, Rear Bearing — Inner 3 109 218717 CAP, Impeller Cover 1 78 223961 RING, Bearing Washer Retaining 3 110 229768 STUD, Ring Gear to Flywheel 24 79 222038 WASHER, Rear Bearing — Outer 3 110A 68D-06 t NUT, Ring Gear 24 80 226025 BEARING, Pump Shaft Rear 3 111 228986 WASHER, Ring Gear 24 81 1C-722 BOLT, Cover to Housing 12 111A 228987 t WASHER, Belleville — Cupped 96 82 4E-07 LKWSHR, Cover to Housing 12 112 219234 "0" RING, Converter to Flywheel Hsg.
1 83 216095 SHAFT, Pump Drive 3 113 226595 GEAR, Flywheel Ring 1 84 225385 BEARING, Pump Shaft Front 3 114 8C-716 BOLT, Impeller Cover Cap 8 85 222037 GEAR, Pump Driven (35T) 3 115 86 224036 RING, Driven Gear Retaining 3 116 663834 RING, Bearing Retainer Retaining 1 87 214941 SEAL, Oil Baffle Oil 1 117 225781 BEARING, Front 1 221478 PIN, Turbine Hub Retaining Dowel 2 88 218721 BAFFLE, Oil 1 118 711161 RING, Reaction Member Retaining 1 89 222221 BOLT, Impeller to Hub 8 119 302602 PIN, Reaction Member Spacer Roll 1 90 222019 LOCKPLATE, Impeller to Hub 4 120 223988 RING, Impeller Hub Bearing Retaining 1 91 1C-622 BOLT, Impeller to Cover 30 121 218777 "0" RING, Oil Baffle 1 92 4E-06 LKWSHR, Impeller to Cover 30 122 1C-612 BOLT, Oil Baffle 3 93 222265 IMPELLER 1 123 94 60K-40700 "0" RING, Impeller Hub 1 124 5E-06 LKWSHR, Oil Baffle 3 616786 WASHER, Oil Baffle 3 125 95 222266 HUB, Impeller 1 551323 t SENDER UNIT, Converter Temp.
1 126 96 225778 BEARING, Impeller Hub 1 12E-10 t LKWSHR, Sender Unit 1 127 14D-10 t NUT, Sender Unit 1 97 218782 SPACER, Reaction Member 1 128 541221 t BUSHING, Flywheel Pilot 1 98 218859 MEMBER, Reaction 1 129 17C-724 t BOLT, Converter Housing to Flywheel 12 99 222223 BOLT, Turbine to Hub 8 130 4E-07 t LKWSHR, Cony. Housing to Flywheel 12 *NOTE: When Converter Charging Pump replacement is required, only a new factory built and tested pump should be used. Proper operation of converter and transmission is dependent on an efficient charging pump. Damage possible by use of a field rebuilt pump can result in repair cost exceeding cost of a new pump alone.
tNot Illustrated WHEN ORDERING PARTS, ALWAYS STATE MODEL AND SERIAL NO. OF MACHINE [ 36 ] PM 2282