12.OPERATION 2. Turn fuel control dial towards the full speed (MAX) position to in- crease the engine speed. 3. Set safety lock lever in the FREE position, fold the work equip- ment, and raise it 40 - 50 cm from the ground. 4. Operate right and left travel levers or right and left travel pedals as follows. When the sprocket is at the rear of the machine Push levers backward slowly or depress the rear part of pedals slowly to move the machine off. When the sprocket is at the front of the machine Pull levers forward slowly or depress the front part of pedals slowly to move the machine off. PC130/150LGP-6K ENG 2-59