24. SERVICE PROCEDURE 24.5.2 CHECK OIL LEVEL IN SWING MACHINERY CASE, ADD OIL WARNING The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before carrying out this check. 1. Remove dipstick and wipe the oil from the dipstick with a cloth. 2. Insert dipstick fully in the guide. 3. When dipstick is pulled out, if the oil level is between the H and L marks of the gauge, oil level is proper. 4. If the oil does not reach the L mark on dipstick , add engine oil through dipstick insertion hole . When refilling, remove bleeding plug . NOTICE For details of the oil to use, see "20.
USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE". 5. If the oil level exceeds the H mark on the dipstick, loosen drain plug to drain the excess oil. 6. After checking oil level or adding oil insert the dipstick into the hole and install air bleeding plug . PC130/150LGP-6K ENG 3-49