29. INTRODUCTION OF OPTIONAL PARTS AND ATTACHMENTS 29.3 SELECTION OF TRACK SHOES Select suitable track shoes to match the operating conditions. METHOD OF SELECTING SHOES Confirm the category from the Use column in the table below, and select the shoes from the table below that. Categories B and C are wide shoes, so there are limitations on there use. When using these shoes, check the precautions, then investigate and study fully the conditions of use to confirm that these shoes are suitable. When selecting the shoe width, select the narrowest shoe possible that will give the required flotation and ground pressure.
If a wider shoe than necessary is used, the load on the track will increase, and this will cause the shoes to bend, links to crack, pins to break, shoe bolts to come loose, and various other problems. PC130/150LPG-6K ENG 5-13 Use A Rocky ground, riverbeds,normal soil • On rough ground with large obstacles such as boulders or fallen trees, travel at low speed. B Normal soil, soft ground • These shoes cannot be used on rough ground where there are large obstacles such as boulders or fallen trees. • Travel at Hi speed only on flat ground, and if it is impossible to avoid going over obstacles, shift down and travel at half speed in Lo.
C Extremely soft ground (swampy ground) • Use the shoes only in places where the machine sinks and it is impossible to use A or B shoes. • These shoes cannot be used on rough ground where there are large obstacles such as boulders and fallen trees. • Travel at Hi speed only on flat ground, and if it is impossible to avoid going over obstacles, shift down and travel at half speed in Lo. PC130-6K PC150LGP-6K Specifications Category Specifications Category Standard 500triplegrouser A 800triplegrouser C Option 600triplegrouser B 900triplegrouser C Option 700triplegrouser C 1000triplegrouser C