12.OPERATION 12.1.3 ADJUSTING BEFORE STARTING OPERATION ADJUSTING OPERATOR'S SEAT (rigid seat specification) fore-and-aft adjustment of seat Pull lever up. After the seat is set to the desired position, release the lever. Adjustable distance: 100 mm in 5 steps. Adjustment of reclining seat Pull lever up. After the seat back is set to the optimum position for easy operation, release the lever. NOTICE The amount of reclining for the seat is greatest when the seat is moved forward, and becomes smaller as the seat is moved to the rear. For this reason, when moving the seat to the rear, set the seat back to the upright position. Pull lever up.
After the seat back is set to the optimum position for easy operation, release the lever. Sit with your back against the seat back when adjusting. If your back is not touching the seat back, the seat back may suddenly move forward. Adjustment of seat tilting angle 1. Forward tilting Pull lever up to release locking. Adjust the angle at the front of the seat. After the seat is set to the optimum position for easy operation, release the lever and then lock it. 2. Backward tilting Push down lever to release locking. Adjust the angle at the rear of the seat. After the seat is set to the optimum position for easy opera- tion, release the lever then lock it. 3.
Seat height adjustment By a combination of steps 1 and 2, the seat can be moved up and down. First use the rear tilt operation to adjust the rear of the seat, then use the front tilt operation to set the seat horizontal. Adjustable height: 65 mm. PC130/150LGP-6K ENG 2-43 WARNING • Adjust the seat position at the beginning of each shift or when operators change. • Adjust the seat so that the travel pedal can be depressed all the way with the operator's back against the backrest. WARNING