OPERATION DETAILED CONTROLS AND GAUGES REMARK If the mode is set to auto mode and the temperature setting is set to 18.0 °C and 32.0 °C, the air flow from the fan is always set to HIGH and does not change even when the set temperature is reached. Vent Selector Switch This switch (4) is used to select the vents. q When switch (4) is pressed, the display on monitor display (7) switches and air blows out from the vents displayed. q During automatic operation, the vents are automatically selected. (A): Rear vents (4 places) (B): Face vent (1 place) (C): Foot vent (1 place) (D1): Front window vent (1 place) (D2): Front window vent (1 place) A Note 1: Air blows out from vents marked O Note 2:
The defroster vents can be opened or closed manually with the vent lever. 3-37 Liqiud crystal display Vent mode Vent Remarks (A) (B) (C) (D) Front and rear vents (including defroster vent) O Cannot be selected for auto- matic operation Front, rear and foot vents (including defroster vent) O O - Foot vent O O - O Front , foot vents (including defroster vent) O O Cannot be selected for auto- matic operation Front vents (including defroster vent O Cannot be selected for auto- matic operation