OPERATION MACHINE OPERATIONS AND CONTROLS 3. Turn the key in starting switch (3) to the START position (C). The engine will start. 4. After the engine starts, release the key in starting switch (3). The key will automatically return to the ON position (B). 5. Even after the engine is started, do not touch the work equipment control levers and the travel pedals, while the engine hydraulic pressure monitor lamp is still lighted. NOTICE If the engine oil pressure monitor does not go out even after 4 to 5 seconds have passed, stop the engine immedi- ately. Check the oil level, check for leakage of oil, and take the necessary action. 3-73