TRANSPORTATION OPERATION Rearview Mirrors The mirrors are at the positions shown in the diagram on the right. If they are damaged, or are to be removed for shipment, or are to be installed again, use the following procedure. q After installing the mirrors, be sure to adjust them, Rear- view Mirrors (3-66) Removal q Mirrors (A), (B) 1. Loosen mounting bolt (2), then remove mirror (1) from sup- port (3). 2. Loosen bolt (4) and remove support (3) and clamp (5) from the handrail. q Mirror (C) 3. Loosen locknut (2), then remove mirror (1) from support (3). 4. Remove bolt (4), then remove support (3) from the machine. q Mirror (D) 5. Loosen locknut (2), then remove mirror (1) from support (3). 6.
Loosen bolt (4) and remove suport (3) and clamp (5) from the handrail. 3-112