ATTACHMENTS AND OPTIONS SUPER LONG FRONT BOOM AND ARM METHOD OF WORK 6 q Avoid operating the bucket cylinder and arm cylinder to the end of their stroke. q Use for maximum specific gravity 1.1 tonnes/m 3. q Take care when using the super long front on soft ground. Ensure the ground has sufficient strength to sup- port the weight of the machine with loaded bucket before commencing operations. q Where possible, avoid using the super long front machine on slopes. q Do not use this equipment for compacting slope faces. q When travelling, lower the boom, pull in the arm, keep the work equipment parallel to the track and travel slowly.
q Do not use any bucket with a capacity greater than shown in this table: Buckets which do not conform to this table must not be used. Parameter Spec Max digging radius, mm 12300 q Capacity CECE (SAE, m 3 ) 0.28 (0.3) q Bucket Width, without sidecutter (mm) 700 q Bucket Width, with sidecutter (mm) 820 WHEN TRAVELLING 6 q Lower the boom, pull in the arm, keep the work equipment parallel to the track and travel slowly. q Never mount obstacles when travelling on rough ground. This may cause the machine to become unstable and overturn. 6-39