ATTACHMENTS AND OPTIONS SUPER LONG FRONT BOOM AND ARM TRAVEL LEVERS (WITH PEDAL, AUTO-DECELERATION MECHANISM) (2) 6 q Do not put your foot on the pedal unless the machine is travelling. If you leave your foot on the pedal and press it by mistake, the machine will move suddenly, and this may lead to a serious accident. q With the track frame facing to the rear, the machine will move in the reverse direction by forward travelling and in the forward direction by reverse travelling. q When the travel lever is used, check to see if the track frame is facing forward or backward. (If the sprocket is located to the rear, the track frame is facing forward.) N (Neutral):
The machine stops ( ) This indicates operation of the pedal. LEFT WORK EQUIPMENT CONTROL LEVER (3) 6 (with auto-deceleration device) WARNING If any lever is operated when in the deceleration range, the engine speed will suddenly increase, so be careful when operating the levers. This lever is used to operate the arm and upper structure. AM089560A N (Neutral) When the lever in Neutral (N) position, the upper structure and the arm will be retained in the position in which they stop. 6-41 WARNING (1) FORWARD (2) REVERSE The lever is pushed forward The lever is pulled back.
(The pedal is angled forward) (The pedal is angled back) Arm operation Swing operation (A) Arm OUT (C) Swing to right (B) Arm IN (D) Swing to left