4.8 Service procedure When required Maintenance 8. If small holes or thinner parts are found on the element when it is checked by shining a light through it after cleaning, replace the element. NOTE When cleaning the element, do not hit or beat it against any- thing. Do not use an element whose folds, gasket or seal are dam- aged. When installing the cover (3), check O-ring (7) and replace it if there are any scratches or damage. 9. Set the cleaned outer element in position, then secure cover (3) with mounting clips (2). 10. Press the button of dust indicator (1) to return the red piston to its original position. GK020026 Replacing element 1.
Open the engine side cover on the right side of the machine. 3 2. Remove three clips (2), then remove cover (3). 2 GK015004 3. Remove outer element (4). Do not remove inner element (5) at this time, however. 4-24 WA150-5H – VEAM934100 GK032242 CAUTION 5 4 GK032239