3.2 Explanation of components Operation 12. Rear working lamp switch Always turn the working lamp off before traveling on public roads. This switch (12) is used to light up the rear working lamp. a A Position (a): Working lamp and pilot lamp (A) light up b Position (b): Working lamp goes out REMARK If the lamp switch is not at the ON position for the side clearance lamp or head lamp, the working lamp will not light up. GK032123 13. Monitor panel mode selector switch 1 This switch (13) is used to switch the function of the character display. When the switch is released, it automatically returns to its origi- nal position. The basic operation is as follows. Position ( ‘ ):
Press here to select (confirm) each mode or operation GK032131 Position ( „ ): Press here to cancel each mode or operation 14. Monitor panel mode selector switch 2 This switch (14) is used to switch the function of the character display. When the switch is released, it automatically returns to its origi- nal position. The basic operation is as follows. Position (>): Press here to go on to the next screen, or to move the cursor forward, or to increase the number when entering numerals GK032132 Position ( Press here to go back to the previous screen, or to move the cursor back, or to reduce the number when entering numerals 3-36 WA150-5H – VEAM934100 WARNING WARNING