. OPERATION MACHINE OPERATIONS AND CONTROLS The range for excavating with the arm is from a 45 ° angle away 3 - 100 RECOMMENDED APPLICATIO In addition to th e following, it is possibl e to further increase th e range of applications by u sing various attachments Backhoe Wo rk uitable for excavating at a position lower than the A backhoe is s machine. When the cond ition of the machine is as shown in the d iagra m at right, each cy linder's maximum pu shing excavation forc e is obtained when the bucket cylinder an d link, arm cylinde r and arm are at 90°. When excavati ng, use this angle effec tively to op timize your work efficiency.
from the machi ne to a 30° angle towa rd the machine There may be some differences depe nding on t he digging d epth, not try to keep within the above range rather tha n operating t o the end of the cylin Shovel Work A shovel is sui machine. Shov el work is performed by attaching the bucket i n the reverse directio Ditching Wor k can be performed efficiently by attaching a bucket Ditching work taching ucket which matches the digging operation and then s cavated. acks parallel to the li ne of the ditch to be ex To excavate a remove the ce