. OPERATION MACHINE OPERATIONS AND CONTROLS always travel at right angles to the object. the the 3 - 114 Alway s maintain the rubber sho es at the proper tension to preven If the tension is low, the rubber shoes will come off under Even if the tension is correct, be extremely careful when c arrying out 1. Avoi d operating the steering w hen traveling over curbs, r ocks, difference in height (more than jects, 2. Whe n traveling in reverse up a slope, do not turn when m oving from If it i flat ground onto the slope . es, be sure to turn gradually. s necessary to turn on slop es, be sure to turn gradu 3.
Avoi d traveling along the edge of slopes or on rough gr ound with angl side rubb grou the track on one side raise d (with the machine tilting at an e of more than approx.10°) and with the track on the other on flat ground. To avoid damage to the road l iners and er shoes, travel with the tracks on both sides on flat nd. 4. If th e machine is operated as explained in 1 to 3 above rubb posi er shoes is slackened. D o not steer the machine i tions shown in the figure.