. OPERATION TRANSPORTATION under selector switch to low speed travel (Lo 3 - 118 Loading d unload on firm level ground only. a safe distance from the edge of a road. 1. 2. 1. Load an d unload on firm level ground o Maintain a safe dista nce from the edge 2. Properly apply the b rakes on the traile r and put blocks the tires to ensure th at the trailer does not move. m of 15°. Make th e slope of th e ramps a maximu 3. Turn the travel spee lamp ligh ts up). 4. Run the engine at lo 5. When lo ading, set t he work equipme nt at the front and the blade at the rear, with the undercarriage and upper structure llel. structure set para 6.
Before m oving onto the ramps, make s ure that the machine is position ed in a str aight line with the ramps and that the centerlin e of the ma chine matches that of the trailer. Align the direction of travel with the ram ps and travel slowly Lower th e work equi pment as far as po ssible without causing interfere nce. n the ramps, operate only the travel lever. Do not any other lever. When o operate any other le