. MAINTENANCE MAINTENANCE PROCEDURE CHECK PTO GEAR CASE, ADD OIL WARNING oil is near add oil CHECK ALTERNATOR, STARTING MOTOR 4 - 72 EVERY 2000 HOURS MAINTENANCE Maintenance f or every 50, 100, 250, 500 and 1000 hou rs service sho uld be c arried out at th The parts and oil are at high temperat ure immediately after the engine is st opped, an d may cause ser ious burns. Wait for the o go down before startin g the operation. If there is still pressure remaining insi de the cas e, the oil o r plug may fly o lug slowly to release the pressure. Refill capac ity: 0.4 liters (0.11 US 1. Remove o the bottom through oil hole of plu 2. Install plug il inspection plug (G) and chec of the check hole.
I f the oil level is lo filler (F) until the oil lev el is clos e to the bo CLEAN, CHECK TURBOCHARG Contact your K omatsu distributor for cleaning and insp The brushes m at be worn or the bear ing may h ave run o ut of grease, c ontact yo ur Komatsu di stributor for inspection and repairs. If the engine is started frequently, ha ve this in spection carried out ev ery 1000 CHECK ENGINE VALVE CLEARANCE, ADJUST As special tool is required for remov ing and a djusting t he parts, you s hall request Komatsu distributor for se rvice.