. OPERATION DETAILED CONTROLS AND GAUGES to 25 A). If REMARK Power may be sourced from the cigarette lighter, too. For the details, see the section of "Cigarette Lighter (PAGE 3-19)" in this manual. CONTROLLERS NOTICE Do not let water, mud, or juice spill on the controller.This will cause failures. If any abnormality occurs in the controller,do not repair it by yourself. Please contact your Komatsu distributor for repairs. The controller is installed behind the operator's seat. 3 - 39 FUSIBLE LINK If power is not supplied even af ter turning the en gine starting s witch ON, fusib le link ( 1) is suspec ted of disconne ction.
In that case, open up t he dust cover on the right side of the machine, chec k and replace it if necessary. REMARK A fusible link refers to the large-sized fuse wiring installed in the rent flow portion of the circuit to protect electrical nts and wiring from burning, in the same way as an use. high cur w portion o compone nts and ordinary f AUXILIARY ELECTRIC P NOTICE When inst alling electrical not sup plied by Komatsu , use 24 V specifications with a maximum of 600 equipment is to be installed with a capacity greater than this, pleas e contact your Komatsu distributor. An option al connector (No. K 17) is fastened to a cab le wi th an adhesive tape at the rear part of the cab's floo r.
This i s for t aking out powe r for optional electrical equipment made by other than such electrical equipment becomes necessary, use the r after peeling the tape off. Komatsu. If use of connecto The conn ector types are show n in the table be X type housing (2-terminal) Terminal Body R ear holder AVS 0.5 - 1.25 AVS 2 - 3 055-00212 08 055-00230 08055-00040 08055-00041