3. Model 425: COLD engine: Choke engine by pushing choke lever (B) all the way up to CHOKE (Closed) position. M71641 4. Turn key (A) to the RUN position (C). M71630 5. Check indicator lights: · Oil Pressure indicator (E) will be ON. IMPORTANT: Avoid damage! If indicator (F) blinks after engine is started, STOP engine. Be sure to wait 1/2 second before cranking engine again. · Battery Discharge indicator (G) will be ON. · Model 425: Injection System Failure Indicator (F) will come on for a few seconds. WAIT for approximately 1/2 second before cranking the engine. 6. Turn key to the START position (D): · Crank engine. 34