2. Place drain pan so it is under the drain plug (A) and the filter. Remove drain plug to drain oil. m71514 3. Turn transaxle filter (B) counterclockwise with a filter wrench to remove it. 4. Put a film of clean transmission oil on seal of new filter. 5. Install the filter until it contacts the mounting surface. Tighten filter BY HAND 2/3 to 1 turn more. 6. Install and tighten drain plug. 7. Slide seat forward. m71511 8. Remove dipstick (A). Add John Deere Low Viscosity HY-GARD® or an equivalent J20D transmission oil: · Two Wheel Steer: 6.6 L (7.0 qt). · All Wheel Steer: 5.7 L (6.0 qt). 9. Install and tighten dipstick. 10.
Start engine and check for oil leaks around filter base and drain plug. 89