EXAMPLE #5 – ADVANCED TURNING – UPPER UNIT ONLY MATERIAL : AISI 4140 ALLOY STEEL - 275 HB STOCK : 3.5 DIA ROUND BAR X 4.85 LONG PROJECTION: 2.5 MINIMUM FROM JAW FACE ADAPTERS : SANDVIK C6-DCMNN-00115-12 (1), SANDVIK C6-DDMNL-0013-1504 (1) INSERTS : CNMG-432 (1), DNMG-431 (1) SPINDLE : LEFT MAIN WORK COORD: G54 ORIGIN : X0.0 = SPINDLE CENTERLINE, Z0.0 = FINISHED FACE PROCESS : FACE, ROUGH & FINISH TURN HALF OF PART Q-SETTER : TOUCH OFF BOTH TOOLS IN X ONLY AT B0.0 TOOL #3 ADAPTER : C6-DCMNN-00115-12 INSERT : CNMG432 ORIENTATION : G490 S1800 B-AXIS TILT : -45.0 TOOL #4 ADAPTER : C6-DDMNL-0013-1504 INSERT : DNMG431 ORIENTATION : G490 S1800 B-AXIS TILT : -20.0 - 28 -