Servo Driven Tail Stock % O8997 (SUB - ENGAGE SERVO DRIVEN TAILSTOCK) G54 G98 G01 A1.0 F100.0 (POSITION TAILSTOCK IN TRAVERSE MODE - THRUST OFF) G300 B-600.0 (ENGAGE TAILSTOCK TOWARD CHUCK WITH THRUST OF 600KGF) G99 M99 % % G54 G98 G301 (DISENGAGE THRUST) G01 A2.0 F100.0 (POSITION TAILSTOCK IN TRAVERSE MODE - THRUST OFF) G00 G28 G53 A0.0 (SEND TAILSTOCK HOME) G99 M99 % O8998 ( SUB - R ETRACT SERVO DRIVEN TAILSTOCK) Macro-B OD Jaw Program % O8999 (BORE JAWS - !!!DO NOT ERASE!!!) (****** DEFINE JAW DATA ******) #100=5.5 (STARTING DIA X) #101=6.5 (FINAL DIA X) #102=0.1 (DIA DEPTH PER PASS) #103=-3.5 (FINAL DEPTH Z) (*****************************) G18 G40 G80 G99 G00 G28 U0.0 V0.0 G00 G28 W0.0 G54 G00 B-90.0 M06 T20020 (SANDVIK ID BAR LEF T HANDED - DNMG432) G490 S1800 (ORIENT TO LEFT HAND) G00 B-90.0 G00 Z5.0 M126 M34 M261 G50 S600 G96 S500 M04 P11 G00 Z0.1 G00 X [#100] G01 Z [#103+0.01] F0.012 G01 X [#100-0.1] G00 Z0.1 #104=[#100+#102] GOTO2 N1 #104=[#104+#102] N2 IF[#104GT#101]GOTO99 G00 X [#104-0.02] G01 Z [#103+0.01] F0.012 G01 X [#104-0.15] G00 Z0.1 GOTO1 N99 - 66 -