VHMS - Section 60 10/11 OM6011 Page 60-8 PLM DOWNLOADING Download the recorded data to a laptop computer that has the download software installed. Downloading From Ground Level Box Downloading From Inside Of The Cab Before downloading from the ground level box, turn the key switch to the OFF position. Check the surrounding area and ensure it is safe. 1. Turn the key switch to the OFF position. 2. Open the ground level download box. Use the starting switch key to open and close the box. 1. Connect the PLM download cable to PLM con- nector (1). Connect the other end of the cable to the RS232C port of the personal computer. If necessary, use a USB adapter to connect.
Refer to Other Settings later in this chapter. 3. Turn switch (2) to the ON position. Display lamp (3) will illuminate. 2. Turn the key switch to the ON position. 3. Turn on the computer and use the software to download the data. 4. Connect the PLM download cable to the PLM connector. Connect the other end of the cable to the RS232C port on the computer. If neces- sary, use a USB adapter to connect. Refer to Other Settings later in this chapter. 4. After completing the download, remove the download cable. 5. Turn on the computer and use the download software to download the data. 6. After completing the download, return the switch inside the box to the OFF position. Close the box.