Komatsu — LOADING

OM3054 03/13 Operating Instructions - Section 30 Page 30-11 7. Apply the brake lock switch at the shovel and dump areas. LOADING 1. Approach the loading area with caution. Remain at a safe distance while the truck ahead is being loaded. 8. Proceed slowly on rough terrain to avoid deep ruts or large obstacles. Do not travel along soft edges or the edge of the fill area. 2. DO NOT drive over unprotected power cables. 3. When near loading areas, watch for other vehi- cles and for personnel working in the area. 9. Truck operation requires concentrated effort by the driver. Avoid distractions of any kind while operating the truck. 4.

When approaching a loader or shovel, follow the spotter or shovel operator signals. The load- ing process may be shortened by following sim- ilar patterns of the trucks that have already been loaded. 10. When driving at night or when visibility is poor, the headlights must be on. DO NOT travel in these conditions if the headlights are inopera- tive. 11. DO NOT travel in reverse if the back-up horn or lights are inoperative. 5. The operator must remain in the truck cab with the engine on during loading. Place the trans- mission shift lever in NEUTRAL and apply the brake lock switch. 12. When driving in reverse, signal with three honks on the horn.

When starting forward, signal with two honks on the horn. Signal each time the truck is moved forward or backward. 13. DO NOT stop or park on a haul road unless unavoidable. If you must stop, move the truck to a safe place. Apply the parking brake and turn off the engine. Block the wheels securely and notify maintenance personnel for assistance. If the operator must leave the truck cab during loading, the engine must be shut off and the parking brake applied. DO NOT use the second- ary brake for parking. Remain far enough away from the truck to avoid being struck by flying material. 14.

If the low steering pressure warning illuminates during operation, immediately steer the truck to a safe stopping area away from other traffic. Refer to the previous item above. 6. When the truck is loaded, drive away from the shovel as quickly as possible, but with extreme caution. 15. Report adverse haul road conditions, immedi- ately. Muddy or icy roads, pot holes or other obstructions can present hazards. 16. Keep cab doors closed at all times while the truck is in motion or unattended. 17. Check for flat tires periodically during the shift. If the truck has been operating on a flat tire, allow the tire to cool before parking indoors.