Preparation After Storage Taking this vehicle out of storage and correctly preparing it will assure many miles and hours of trouble-free riding. Arctic Cat recommends the following procedure. 7. Check the entire brake systems (fluid level, pads, etc.), all controls, head- lights, taillight, brakelight, and head- light aim; adjust or replace if necessary. 1. Clean the vehicle thoroughly. 8. Check the tire pressure. Inflate to rec- ommended pressure as necessary. 2. Clean the engine. Remove the cloth from the exhaust system. 9. Tighten all nuts, bolts, cap screws, and screws making sure all calibrated nuts, cap screws, and bolts are tight- ened to specifications. 3.
Check all control wires and cables for signs of wear or fraying. Replace if necessary. 4. Change the engine/transmission oil and filter. 10. Make sure the steering moves freely and does not bind. 5. Check the coolant level and add prop- erly mixed coolant as necessary. 11. Check the spark plug. Clean or replace as necessary. 12. Check the air filter and the air filter housing. Clean or replace as neces- sary. 6. Charge the battery; then install. Con- nect the battery cables making sure to connect the positive cable first. CAUTION Before installing the battery, make sure the ignition switch is in the OFF position. 55