MAINTENANCE Replacing Inner Element 1. First remove the cover and the outer element, and then remove the inner element. 2. To prevent dust from getting in, use a clean cloth or tape to cover the air connector (outlet side). 3. Clean the air cleaner body interior, then remove the cover installed in Step 2. 4. Fit a new inner element to the connector and tighten it with nuts. NOTE: Do not clean and reinstall an inner element. 5. Install the outer element. Using Water Wash the element with water at less then 3 kg/cmІ (43 psi) of pressure, from the inside along the folds, then from the outside and again from the inside. then let the element dry.
Using Water with a Cleaning Agent To remove oil, grease and carbon etc. clean the element in a lukewarm solution of mild detergent, then rinse in clean water and let it dry. REMARKS: Using warm water about 40 may also be effective in cleaning the element. To speed up the drying process, blow air with less than 7 kg/cmІ (100 psi), of force to the inside of the element. NOTE: Do not attempt to heat the element. 3-32 WA320-3MC