OPERATION 5. TRANSMISSION SELECTOR SWITCH This switch when depressed once selects the “on” position, or manual transmission mode. The lamp is lit. Depressing the switch again selects the “off” position, which is Auto-Shift transmission mode, and the lamp is off. Normal operation should be in the “off” position, Auto-Shift transmission mode, with the indicator lamp off. See “11.3 CONTROL LEVERS, PEDALS” on page 2-21, for additional information. 6. LAMP SWITCH/TURN SIGNAL LEVER/DIMMER This lever performs three functions. LAMP SWITCH To illuminate lamps, side clearance lamps, tail lamps, and instrument panel lighting rotate the end as follows (1) OFF (2) position:
Side clearance lamp, tail lamps, and gauge lighting light up (3) position: Head lamps light up in addition to lamps at (2) position REMARKS: The lamp switch can be operated regardless of the position of the lever. TURN SIGNAL LEVER The lamp switch lever also operates the turn signal lamps. (1) LEFT TURN: Push lever FORWARD. (2) RIGHT TURN: Pull lever BACK. REMARKS: When the lever is operated, the turn signal pilot lamp also will light. When the steering wheel is turned to the neutral position, the turn signal lever will return automatically to OFF. If not, return the lever to OFF manually. DIMMER SWITCH This switches the head lamp between high beam an low beam.
(A) Low beam (B) High beam 2-16 WA320-3MC