OPERATION 11.3 CONTROL LEVERS, PEDALS 1. SPEED CONTROL LEVER MANUAL SHIFT This lever controls the travel speed of the machine. This machine has a 4-FORWARD, 4-REVERSE speed transmission. Place the speed control lever in a suitable position to obtain the desired speed range. 1st and 2nd speeds are used for working. 3rd and 4th speeds are used for traveling. However, the speed control lever stopper prevents the shift to 3rd or 4th. Disengage the stopper before trying to shift gears. Position (1): 1st Position (2): 2nd Position (3): 3rd Position (4): 4th REMARKS: The length of the lever can be adjusted to 3 stages (position (A), (B) or (C)).
To adjust the length, remove the screw at the bottom of the lever knob, slide the knob to the desired position, then tighten the screw again. (The machine is shipped with the lever at position (B).) AUTO SHIFT FUNCTION 2-21 WA320-3MC