11. EXPLANATION OF COMPONENTS 3. HYDRAULIC OIL LEVEL This warns that the hydraulic oil level is too low. If the monitor lamp flashes, check the hydraulic oil level, and add oil. 4. REPLACEMENT OF ENGINE OIL (For only set machines) If the set time (125, 250, 500H) passes after the engine oil is replaced, this lamp lights up. At this time, replace the engine oil. 11.1.2 B: CAUTION ITEMS CAUTION If the caution monitor lamp flashes, repair the problem as soon as possible. 1. CHARGE LEVEL This monitor indicates an abnormality in the charging system while the engine is running. If the monitor lamp flashes, check the V-belt tension. If any abnormality is found, see “16.6 OTHER TROUBLE”.
REMARK While the starting switch is ON, the lamp will remain lit and will go off once the engine is started. 2. FUEL LEVEL If the fuel drops below 55 liters (14.5 US gal, 12.2 UK gal), the lamp will flash. Top up the fuel before this. 2-7