11. EXPLANATION OF COMPONENTS 2. AUTO-DECELERATION SWITCH (Selection switch) This switch acts to activate the function that automatically low- ers the engine speed and reduces fuel consumption when the control lever is at neutral. ON lights up: Auto-deceleration is actuated. OFF: Auto-deceleration is canceled. Each time the switch is pressed, the auto-deceleration is actuated or canceled. AD157780 3. TRAVEL SPEED SWITCH ¤ WARNING If the Hi-Lo switch is operated when the machine is traveling, the machine may deviate even when traveling in a straight line. To prevent this, always stop the machine before operating the travel speed switch. AD157790 This is used to select the three travel speeds.
Lo lights up: Low speed travel Mi lights up: Middle speed travel Hi lights up: High speed travel When the engine is started, the travel speed is automatically set to Lo. When traveling in high speed travel (Hi) or middle speed travel (Mi), the travel speed is automatically switched to low speed travel (Lo) to match the travel surface on soft ground or when traveling uphill, so there is no need to operate this switch. Monitor lamp remain the light up (Hi or Mi). 2-13