www.changlin.com.cn General Information Cummins Engine Company. Inc. recommend to obtain proper operation and preserve the warranty on engine; follow maintenance schedule in this section. If the engine is operating in ambient temperatures consistently below-18°C [0°F] or above 38°C [100°F], perform maintenance at shorter intervals. Shorter maintenance intervals are also required if the engine is operated in a dusty environment or if frequent stops are made. See your Cummins Authorized Repair Location for recommended intervals. Use the chart provided on page 2-9 as a convenient way to keep a record of maintenance performed.
*lf the engine is equipped with a component or an accessory not manufactured by Cummins Engine Company. Inc, refer to the component manufacturer’ s maintenance recommendations. A listing of suppliers’ addresses and telephone numbers is provided in Component Manufacturers, Section C. Tool Requirements In the text, a symbol followed by the wrench size or tool description is used to identify the tooling required to perform each step. A list of wrench sizes and descriptions indicate more than one tool is needed. Feeler Gauges (0.30 mm and 0.61 mm) Engine Barring Gear Part NO. 3377371. DCA4 Test Kit, Fleetguard Part No.
CC-2626 3823276 Injector Puller 33 / 149 pages Sockets Wrenches Other Tools 19mm 19mm 17mm Filter Wrenches (75-80mm, 90-95mm and 118-131 mm) 17mm 15mm Ratchet (1/2 and 3/8 inch drive) 15mm 14mm Torque Wrench 13mm Flat Blade Screwdriver 10mm 5/16 Allen Wrench