www.changlin.com.cn 10 and 15mm Install the crankcase vent tube and secure with the support clamps and hose clamp. A=24 N • m [18ft-lb] B=43 N • m [32ft-lb] Screwdriver Install the air crossover tube and any other parts previously removed to gain access to the valve cover Drive Belt Tension Checking Measure the belt deflection at the longest span of the belt. Maximum Deflection: 9.5 to 12.7 mm [3/8 to 1/2 inch] NOTE: The Cummins belt tension gauge ST-1293 can be used. Tension Limit: 360 to 490 N [80 to 100 Ibf] 57 / 149 pages