www.changlin.com.cn 10mm, 19mm Install the water pump and alternator link. Torque Value: (Water Pump) 24N • m [18 ft-lb] (Alternator Link) 43N • m [32 ft-lb] 3/8 inch Square Drive Lift the tensioner arm and pulley to install the drive belt. NOTE: The belt tensioner is spring loaded and must be pivoted away from the belt. Pivoting in the wrong direction can result in damage to the belt tensioner. Caution: during filling, air must be vented from the engine coolant passages. Open the engine vent petcock. Also, be sure to open the petcock on the aftercooler for aftercooled engines. The system must be filled slowly to prevent air locks.
Wait 2 to 3 minutes to allow air to be vented, then add coolant to bring the level to the bottom of the radiator filler neck. 96 / 149 pages