Operator`s Manual Precautionary measures Check before starting !! IMPORTANT !! For perfect brake effi ciency you have to burnish the brake pads. The more you familiarize with the operation of your vehicle, the better you can handle it. !! WARNING !! Always inspect this ATV each time you use it to make sure it is in safe operating conditions. Use the checklist you’ll fi nd at the next page. To do so, please follow the instruc- tions below: Always wear protective clothing: Helmet, goggles, long-sleeved shirt, long pants and boots with low heels and a good tread which pre- vents you from slipping. Choose an area suffi ciently large to safely accelerate your ATV to 30 km/h.
Accelerate to 30 km/h, then com- press brake lever to decelerate to 0 – 5 km/h. Repeat this procedure approx. 20 times until brakes are heated up. Brake burnishing procedure: The service brake is activated by the foot pedal (according to direc- tive 93/14A EC homologation) or via the left hand brake lever (both hydraulic). The right hand lever only activates the parking/auxiliary brake which must not be used as service brake. !! WARNING !! Beginning and inexperienced ATV riders should take a rider training course in occasion of which they obtain or reinforce riding skills and get to know some operating tech- niques. For further information ple- ase contact an authorized ARCTIC CAT dealer.
When mounting the mirrors, please do not screw them in completely to the stop, but fi x them fi rst with the counter-nut. (Otherwise you risk to seriously damage the support!) Page 15