Arctic Cat 400 4x4 / 500 4x4 / 650 H1 / 700 Diesel — Arctic Cat 400 4x4 / 500 4x4 / 650 H1 / 700 Diesel User Manual

Start up the engine wheels with appropriate objects (stone, wedge). !! WARNING !! It is very important not to touch or compress the throttle lever during the starting procedures. 1. Only Diesel: Preheating time needed for warming up incre- ases. If you don’t warm up the en- gine sufficiently, there could occur damages which are excluded of warranty. 1. Test the throttle control by pushing it several times. It must return immediately and completely into its original position. !! CAUTION !! Don’t push the E-starter button longer than 30 seconds. Starting a warm engine !! WARNING !! If the throttle control doesn’t work properly the vehicle should not be started.

Accelerate slightly and press the E-starter button. 1. Push the E-starter button. Emergency starting 1. Shift the transmission into neu- tral. 2. Rotate the ignition key to the O-position. !! CAUTION !! If the temperature is –18°C or be- low, you should activate the carbu- retor pump three times. All ATV models have an emergen- cy recoil starter to use if the elec- tric starter becomes inoperative. To use the recoil starter follow this procedure: !! CAUTION !! It is extremely important to warm up the engine before raising the RPM. The engine should be left in the idle position for at least 3 – 4 minutes before you accelerate more than half way.

In case of ex- tremely low temperatures, the Starting a cold engine (400, 500, 650) !! WARNING !! Be sure the transmission is in the neutral position, there is no gear inserted and the parking brake is engaged when using the emergen- cy recoil starter. If the outdoor temperature is below + 5 єC Page 17